Scientific and industrial worlds have started recently to look again with interest to the basic rules to perform reliability, availability and safety analysis and design on complex electro-mechanical systems. The main failure modes on electronic devices and sensors as well as the main techniques for failure mode investigation are of interest in modern system design. Statistical characterization of the main probability density functions and degradation models of innovation is mandatory to build lasting and safe products. The main reliability design techniques such as: fault tree analysis, cut set method, minimal path approach, critical block analysis for reliability are requested by companies worldwide as well as the knowledge of the main failure modes and reliability databases and handbooks as MIL-HDBK217, OREDA, BELLCORE, etc… Maintenance policies with special attention to corrective and preventive ones are also affected by reliability design in terms of advantages and disadvantages when applied to electro-mechanical systems. The main safety standards as IEC61508, IEC 61511 and EN50129, EN50128, EN50126 are usually considered in industrial design. The aim of this talk is to enable companies to develop inner confidence on advanced modelling techniques involving reliability, availability and safe design. Under this spotlight in addition to traditional and well known statistical models, innovative modelling techniques based on statistical data representation will be introduced and tailored to some specific case studies in the fields of bio instruments, transportations and oil & gas contexts.
