Editorial Board

Instrumentation & Measurement Magazine (IMM)

IMM Editor-in-Chief

Bruno Andò

University of Catania

Italy

Bruno Andò

Biography

Bruno Andò is currently Associate Professor in Measurement Science at the Department of Electric, Electronic and Information Engineering (DIEEI) of the University of Catania, Italy.

He received the M.S. in Electronic Engineering and the Ph.D. in Electrical Engineering from the University of Catania, Italy, in 1994 and 1999 respectively. From 1999 he performs research in the fields of sensor and instrumentation at the DIEEI of the University of Catania.

RESEARCH ACTIVITY

Bruno Andò leads a group of researchers working in the following fields:

Smart Sensing Systems and Readout Electronics;
Assistive Technologies;
Nano and Micro Sensors, µ-fluidics, Bio-Sensors;
Inkjet Printed Sensors and Flexible Sensors;
Sensors exploiting innovative materials (ferrofluids, ferroelectrics and multiferroics);
Sensor Networks;
Smart signal processing and nonlinear techniques (including stochastic resonance and dithering) to improve performances of sensors and bio-receptors.

ACHIEVEMENTS IN SCIENTIFIC SOCIETIES

Since 1997 he is member of IEEE, and since 2013 he is a Senior Member of IEEE.
He is the Chair Elected of the IEEE SAS Advisory Board, 2017-2019.
He belongs to the following Technical Committee of the IEEE Instrumentation and Measurement Society: TC-18 “Environmental Measurements”, TC-37 “Measurement and Networking” and TC-13 “Wireless & Telecommunications in Measurements”.
He is a member of the IEEE Instrumentation and Measurements Faculty Course Development Award Committee for years 2016, 2017.
Since 2010 he is a member of the AitAAL (Italian Association on Ambient Assisted Living) and since 2004 he is a member of the Italian Group of Electric and Electronic Measurement “GMEE”, Italy.
Since 2015 he is the Chairman of the National Research Activity on “Sensors and Transducers for Measurement” of the Italian Measurement Group (GMEE).
He is delegated of the “Sicily (Italy) District on Micro&Nano Systems”, to the Italian Cluster on “Technology for Life Environments (TAV)”, as an expert in the field of "Technology for Assisted Living".
He belongs to the List of supporters of AALOA (AAL OPEN ASSOCIATION-www.aaloa.org/).
In 2011, 2013 he was with the Technical Program Committee of “EvAAL (Evaluating AAL Systems through Competitive Benchmarking)” competition organized by AALOpenAssociation on “Indoor Localization”, Valencia.
IEEE Transactions on Instrumentation and Measurement 2017 Outstanding Reviewer

ACTIVITY IN JOURNAL EDITORIAL BOARDS

He is Associate Editor of the IEEE Instrumentation and Measurement Society - Video Tutorial.
He is Associate Editor in Chief of the IEEE Magazine on Instrumentation and Measurement.
He belongs to the editorial board of the Journal of Sensor Technology (Scientific Research Publishing, SCIRP).
He belongs to the editorial board of the Journal of Sensors (Hindawi).

He acted as a columnist of the IEEE Magazine on Instrumentation and Measurement.

CONFERENCES, PROJECTS, PUBLICATIONS

He has an active role as Organizer, TPC, Publicity Chair and Session Chair, for several National and International Conferences, the latest: IEEE I2MTC (2013,2014, 2015, 2016, 2018), IEEE M&N 2013, 2015, 2017), IEEE SAS (2016, 2017, 2018).
He is the scientific coordinator of several international and national research projects.
He has co-authored more than 8 patents and 200 scientific peer-review papers.
Detailed information are available: http://www.dees.unict.it/users/bando/index.html

EXPERT AND REVIEWER TASKS

He acts as an external expert and reviewer for the following institutions:

Research Executive Agency: H2020-MSCA-IF, H2020-MSCA-ITN, H2020-MSCA-RISE.
the National Centre of Science and Technology, Ministry of Education and Science, Republic of Kazakhstan, Astana.
National Centre for Research and Development, Poland.
Czech-Norwegian Research Programme CZ09.
Italian Research Ministry (MIUR), National Research Programs.
Italian MIUR, evaluation panel for the assessment of research quality in Italy (VQR).

TEACHING ACTIVITY

Since 1999, he has taught several classes in measurement and sensors science.
Since 2011 he teaches the English class, ”Sensors and advanced measurement systems” of the degree in Automation Engineering and Control of Complex Systems: http://masterinautomation.ing.unict.it/
Since 2013 he teaches the English class, “Electronic Measurements” of the degree in Electronic Engineering.
Bruno Andò has tutored several Master Degree and PhD thesis.

Affiliation(s)

University of Catania

Italy

IMM Assistant Editor-in-Chief

Wendy Van Moer

M&W Technics BVBA

Belgium

IMM Senior Editorial Assistant

Kristy Virostek

United States

IMM Associate Editors

Vedran Bilas

University of Zagreb

Croatia

Vedran Bilas

Biography

Vedran Bilas (M’98-SM'10) received his Ph.D. degree in electrical engineering in 1999 and his M.Sc. and Dipl. Eng. degrees in 1995 and 1991, respectively, all from the University of Zagreb. He is a professor of electrical engineering at the Faculty of Electrical Engineering and Computing of the University of Zagreb. He teaches electronic instrumentation, electronic systems, engineering management, and technology entrepreneurship. He received IEEE Croatia Section Award for Outstanding Contribution to Engineering Education in 2011. His research interests include low-power and energy-efficient sensing, electromagnetic induction sensing, and sensor data analytics.

Dr. Bilas was the founding chair of the IEEE Instrumentation and Measurement Croatia Chapter in 2004. He was general co-chair of the IEEE Sensors Application Symposium, Zadar, 2015, and the IEEE International Instrumentation and Measurement Technology Conference, Dubrovnik, 2020. He was an Associate Editor of the IEEE Sensors Journal from 2017-2019. He received recognition as an Outstanding Reviewer of the IEEE Transactions on Instrumentation and Measurement (IEEE TIM) in 2017 and Outstanding Associate Editor in 2018 and 2019. He was an Associate Editor in Chief of the IEEE TIM 2020-2021, and he currently serves as a Senior Area Editor: Circuits and Electronics of IEEE TIM. He is an Associate Editor of IEEE Instrumentation and Measurement Magazine since 2022. Dr. Bilas is a member of the IEEE IMS committees for the Best Dissertation Award and Faculty Course Development Award.

Affiliation(s)

University of Zagreb

Croatia

Domenico Capriglione

University of Cassino

Italy

IMM Editorial Board Members

Salvatore Baglio

University of Catania

Italy

Salvatore Baglio

Biography

Salvatore Baglio received the “Laurea” and Ph.D. degrees from the University of Catania, Italy, in 1990 and 1994, respectively.

Since 1996 he is with the Dipartimento di Ingegneria Elettrica Elettronica e Informatica, University of Catania, where he is currently Full Professor of Instrumentation and Measurement.

Prof. Baglio teaches courses in “measurement theory,” “electronic instrumentations,” and “Micro and nanosensors”.

His research interests are mainly focused on micro and nanotechnologies for sensors and transducers, micro and nanosensors, hysteretic materials for sensors, nonlinear dynamics for transducers, methodologies and integrated devices for energy harvesting.

He has coauthored more than 400 scientific publications including papers in international journals and in proceedings of international conferences, books, chapters in books. He is also co-inventor in international patents.

Prof. Baglio is IEEE Fellow, has served as Associate Editor for the IEEE Transaction on Circuits and Systems and for the IEEE Transaction on Instrumentation and Measurements, he has also been Distinguished Lecturer for the IEEE Circuits and Systems Society.

Prof. Baglio is currently Associate Editor in Chief of the IEEE Transaction on Instrumentation and Measurements. He has been the General co-Chair of IEEE I2MTC 2018 and of IEEE SAS 2016 (SAS Steering Committee (2014-2017)).

Salvo Baglio is an I&M Society AdCom member (2015-2018) where he has served as Video Tutorials EIC (2015-2018), Faculty Course Development Award Selection Committee Member (2015-2016), Vice President Education (2016-2017), Society representative on IEEE Sensor Council AdCom (2017-2019, and the I&M Society AdCom Executive Vice President (2018-2019).

He is currently the Society President (2020-2021).

Affiliation(s)

University of Catania

Italy

Kurt Barbé

Vrije Universiteit Brussel

Belgium

Max Cortner

Boston Scientific Corporation

United States

Max Cortner

Biography

J. Max Cortner earned a BSEE from Iowa State University and an MSEE from the University of Minnesota. After eighteen years as a Test Engineer in defense division of Sperry Corporation, Max moved to the Cardiac Rhythm Management division of Guidant, now the CRM Division of Boston Scientific. Boston Scientific CRM manufactures medical electronics including pacemakers and defibrillators. Max is currently a Senior Fellow Engineer in Test Engineering, a group responsible for automated electronic testing of components, subassemblies and final product in manufacturing. He is a licensed Professional Engineer, a Certified Project Management Professional, and a Senior Member of IEEE. As an active member of the IEEE Twin Cities Section since 1972, Max has held offices in the Computer Society including local chapter chair and area chair. He worked with a group of activists who organized and successfully ran a five-year series of multi-week technical symposia covering hot topics such as computer graphics and artificial intelligence. Max was among the founders of the Twin Cities Chapter of the Instrument and Measurement Society. He helped organize numerous local test conferences and served as General Chair for the IMTC 1998. In 1999, he served on the committee of the IEEE Sections Congress that was held in the Twin Cities. Max was Co-Chair of I2MTC held in Minneapolis in 2013. He now serves on the Instrumentation and Measurement Society Administration Committee in the role of Education Committee Chair, I2MTC Board Chair, and Industrial Relations Subcommittee Chair.

Affiliation(s)

Boston Scientific Corporation

United States

Sebastian Yuri Catunda

Professor

Federal University of Rio Grande do Norte (UFRN), at Natal

Brazil

Sebastian Yuri Catunda

Biography

Sebastian Yuri Cavalcanti Catunda graduated in electrical engineering from the Federal University of Paraíba (1993), achieved M.Sc. degree from the Federal University of Paraíba (1996) and the Ph.D. degree in electrical engineering from the Federal University of Campina Grande (2000) and École Nationale Supérieure des Télécommunications - ENST, Paris. He was a professor of the Department of Electrical Engineering of the Federal University of Maranhão (UFMA) from 1998 to 2011. At UFMA, he chaired the Graduate Program in Electrical Engineering from 2005 to 2011. In 2011 he joined the Federal University of Rio Grande do Norte (UFRN), at Natal, where he is currently a full professor of the Department of Computer Engineering and Automation.

With the Brazilian Society of Automation (SBA), he founded the Instrumentation Committee in 2007 and was the society’s secretary of institutional relations from 2015 to 2016. He is Senior Member of IEEE since 2013. He founded in 2013 and presided until 2017, the Joint Chapter IEEE IMS / CASS of Bahia Section. He is a titular researcher, level 1D, in the Microelectronics area of the Brazilian National Council for Scientific and Technological Development (CNPq), and member of its Advisory Board from 2012 to 2018. His research interests focus on instrumentation and microelectronics including the topics of sensors, analog and mixed circuits, embedded systems, and data acquisition systems, in which he has published more than 120 conferences and journals papers.

Curriculum Vitae

Affiliation(s)

Professor

Federal University of Rio Grande do Norte (UFRN), at Natal

Brazil

Chi Hung Hwang

Taiwan Instrument Research Institute, NARLabs

Taiwan

Ferdinanda Ponci

RWTH Aachen University

Germany

Juan Manuel Ramirez Cortés

National Institute of Astrophysics, Optics, & Electronics

Mexico

Juan Manuel Ramirez Cortés

Biography

Juan Manuel Ramirez Cortés was born in Puebla, Mexico. He received the B.Sc. degree from the National Politechnique Institute, Mexico, the M.Sc. degree from the National Institute of Astrophysics, Optics, and Electronics (INAOE), and the Ph.D. degree from Texas Tech University, all in electrical engineering. Since 2007 he is at the National Institute of Astrophysics, Optics, and Electronics, Mexico, with a current appointment as titular researcher “C”. He has served at INAOE in administrative positions as Academic Representative, Coordinator of the Electronics Department (2015-2016), and Research Director (2016-2017). He is currently member of the National Research System (SNI), level 2. From 1992 to 2007 he was with Universidad de las Americas-Puebla, Mexico, in several academic and administrative positions: faculty member, Graduate advisor, Chair of the Electrical Engineering Department, Dean of the Engineering School, and University Academic Secretary. From 2002 to 2004 he was president of the National Association of Engineering Schools (ANFEI-MEXICO), and president of the Iberoamerican Association of Academic Engineering Institutions (ASIBEI). In 2006 he received an honorary appointment from Texas Tech University as Academy Member of the Electrical and Computing Engineering Department. He is a senior member of IEEE (Institute of Electrical and Electronic Engineering), past president of IEEE Puebla Section, and founder Chair of the IEEE I&MS Puebla Chapter. In the last years he has been member of the IEEE Instrumentation and Measurement Society Administrative Committee in several positions: past Finance Vice-President, past Treasurer and current Executive Vice-President. His scientific production to date consists of 56 refereed papers in scientific journals, 10 book chapters, and 150 papers in-extenso in proceedings of international conferences. He has been reviewer in several conferences and research journals, and project evaluator as RCEA member for CONACYT, Mexico. His research areas include signal and image processing, pattern recognition, neural networks, computer vision, instrumentation and sensors.

Affiliation(s)

National Institute of Astrophysics, Optics, & Electronics

Mexico

Sergio Rapuano

University of Sannio

Italy

Sergio Rapuano

Biography

Sergio Rapuano achieved the MS degree in Electronic Engineering with honors in 1999 and the PhD degree in Computer Science, Applied Electromagnetism and Telecommunications in 2003 from University of Salerno, Italy.

In 2002 he joined the Faculty of Engineering of the University of Sannio, where he currently is Associate Professor of Electric and Electronic Measurement at the Department of Engineering.

He is senior member of the IEEE Instrumentation and Measurement Society and member of the IEEE Standards Association. In particular, within the Instrumentation and Measurement Society he is: Chapter Chair liaison, member of the “Waveform Generation, Measurement and Analysis” Technical Committee (TC-10), chairing the Subcommittee on “Jitter Measurement”; member of the Technical Committee on “Education for Instrumentation and Measurement” (TC-23); vice-chairman of the Subcommittee on Objective Blood Pressure Measurement formed within the Technical Committee on “Medical and Biological Measurements” (TC-25), secretary of the TC-25.

Since 2003 he participated in the organisation of several international scientific meetings in the field of Electronic Measurements: the IEEE International Instrumentation and Measurement Technical Conferences, the International Measurement Confederation (IMEKO) TC-4 Symposia, the IEEE International Workshops on Medical Measurements and Applications, the IMEKO International Workshops on Analog to Digital Converters Modelling and Testing, playing different roles: session chairman, member of the technical program committee, technical co-chairman, general co-chairman.

He published more than 150 papers in international journals and in national and international conference proceedings on the following subjects: ADC and DAC Modelling and Testing, Digital Signal Processing, Distributed Measurement Systems, Medical Measurement and has been guest editor of the following journals: IEEE Transactions on Instrumentation and Measurement, Measurement, Computer Standards and Interfaces and International Journal of Advanced Media and Communications.

He received from the IEEE Instrumentation and Measurement Society the Outstanding Young Engineer Award 2007.

Affiliation(s)

University of Sannio

Italy

Instrumentation & Measurement Magazine (IMM)

IMM Editor-in-Chief

Bruno Andò

IMM Assistant Editor-in-Chief

Wendy Van Moer

IMM Senior Editorial Assistant

Kristy Virostek

IMM Associate Editors

Vedran Bilas

Domenico Capriglione

IMM Editorial Board Members

Salvatore Baglio

Kurt Barbé

Max Cortner

Sebastian Yuri Catunda

Chi Hung Hwang

Ferdinanda Ponci

Juan Manuel Ramirez Cortés

Sergio Rapuano

Veronica Scotti

Shervin Shirmohammadi

George Xiao

Ruqiang Yan