Finance Committee | IEEE Instrumentation & Measurement Society

Finance Committee Chair

Kristen Donnell

Missouri University of Science & Technology

United States

Kristen Donnell

Biography

Kristen M. Donnell (S’07-M’11-SM’12) received her B.S.E.E. degree in May 2001 from Colorado State University, her M.S.E.E degree in December 2003 from the University of Missouri-Rolla, and her Ph.D. degree in Electrical Engineering at Missouri University of Science and Technology (Missouri S&T) in December 2010. Her Ph.D. research was conducted at the Applied Microwave Nondestructive Testing Laboratory (amntl). She is currently an Assistant Professor in the Department of Electrical and Computer Engineering at Missouri S&T, and a member of the research team at the amntl. Her current research interests include modulated antennas/scatterers, materials characterization, frequency selective surfaces, microwave and millimeter wave imaging, and hybrid nondestructive testing methods. Prior to starting her Ph.D. work, Kristen was employed by Raytheon Company, Tewksbury, MA, from 2003 to 2006 as a Systems Engineer and Electrical Engineer.

Dr. Donnell is a Senior Member of IEEE, and is also involved with the IEEE Instrumentation and Measurement (I&M) Society, where she served as an appointed member of the AdCom from 2007-2011 and is currently serving her second term as an at-large AdCom member. She served as the Chapter Chair Liaison from 2010-2012, the Vice President of the Membership Development Committee in 2013-2014, and has been the Distinguished Lecturer Program Chair since 2012. She has also been involved with the Faculty Course Development and Graduate Fellowship Awards. She also developed the annual Chapter Chair Summit that takes place each year at the I&M Society’s flagship conference, the International Instrumentation and Measurement Technology Conference, and recently developed the Chapter Support Program and serves as the Chapter Advisor to the Puebla Section Chapter.

She is the recipient of the IEEE Instrumentation and Measurement Society 2012 Outstanding Young Engineer Award, the Missouri University of Science and Technology Outstanding Teaching Award for the 2011-2012 academic year, and the 2014 Faculty Excellence in Teaching award. During her graduate studies, she was the recipient of the ASNT Fellowship Award for the 2002-2003 and 2006-2007 academic years, the Missouri S&T Chancellors Fellowship for 2006-2009, and the Missouri S&T University Transportation Center Graduate Fellowship for 2006.

Affiliation(s)

Missouri University of Science & Technology

United States

Treasurer

Helena Geirinhas Ramos

Technical University of Lisbon

Portugal

Finance Committee Member

Salvatore Baglio

University of Catania

Italy

Salvatore Baglio

Biography

Salvatore Baglio received the “Laurea” and Ph.D. degrees from the University of Catania, Italy, in 1990 and 1994, respectively.

Since 1996 he is with the Dipartimento di Ingegneria Elettrica Elettronica e Informatica, University of Catania, where he is currently Full Professor of Instrumentation and Measurement.

Prof. Baglio teaches courses in “measurement theory,” “electronic instrumentations,” and “Micro and nanosensors”.

His research interests are mainly focused on micro and nanotechnologies for sensors and transducers, micro and nanosensors, hysteretic materials for sensors, nonlinear dynamics for transducers, methodologies and integrated devices for energy harvesting.

He has coauthored more than 400 scientific publications including papers in international journals and in proceedings of international conferences, books, chapters in books. He is also co-inventor in international patents.

Prof. Baglio is IEEE Fellow, has served as Associate Editor for the IEEE Transaction on Circuits and Systems and for the IEEE Transaction on Instrumentation and Measurements, he has also been Distinguished Lecturer for the IEEE Circuits and Systems Society.

Prof. Baglio is currently Associate Editor in Chief of the IEEE Transaction on Instrumentation and Measurements. He has been the General co-Chair of IEEE I2MTC 2018 and of IEEE SAS 2016 (SAS Steering Committee (2014-2017)).

Salvo Baglio is an I&M Society AdCom member (2015-2018) where he has served as Video Tutorials EIC (2015-2018), Faculty Course Development Award Selection Committee Member (2015-2016), Vice President Education (2016-2017), Society representative on IEEE Sensor Council AdCom (2017-2019, and the I&M Society AdCom Executive Vice President (2018-2019).

He is currently the Society President (2020-2021).

Affiliation(s)

University of Catania

Italy

Sebastian Yuri Catunda

Professor

Federal University of Rio Grande do Norte (UFRN), at Natal

Brazil

Sebastian Yuri Catunda

Biography

Sebastian Yuri Cavalcanti Catunda graduated in electrical engineering from the Federal University of Paraíba (1993), achieved M.Sc. degree from the Federal University of Paraíba (1996) and the Ph.D. degree in electrical engineering from the Federal University of Campina Grande (2000) and École Nationale Supérieure des Télécommunications - ENST, Paris. He was a professor of the Department of Electrical Engineering of the Federal University of Maranhão (UFMA) from 1998 to 2011. At UFMA, he chaired the Graduate Program in Electrical Engineering from 2005 to 2011. In 2011 he joined the Federal University of Rio Grande do Norte (UFRN), at Natal, where he is currently a full professor of the Department of Computer Engineering and Automation.

With the Brazilian Society of Automation (SBA), he founded the Instrumentation Committee in 2007 and was the society’s secretary of institutional relations from 2015 to 2016. He is Senior Member of IEEE since 2013. He founded in 2013 and presided until 2017, the Joint Chapter IEEE IMS / CASS of Bahia Section. He is a titular researcher, level 1D, in the Microelectronics area of the Brazilian National Council for Scientific and Technological Development (CNPq), and member of its Advisory Board from 2012 to 2018. His research interests focus on instrumentation and microelectronics including the topics of sensors, analog and mixed circuits, embedded systems, and data acquisition systems, in which he has published more than 120 conferences and journals papers.

Curriculum Vitae

Affiliation(s)

Professor

Federal University of Rio Grande do Norte (UFRN), at Natal

Brazil

Juan Manuel Ramirez Cortés

National Institute of Astrophysics, Optics, & Electronics

Mexico

Juan Manuel Ramirez Cortés

Biography

Juan Manuel Ramirez Cortés was born in Puebla, Mexico. He received the B.Sc. degree from the National Politechnique Institute, Mexico, the M.Sc. degree from the National Institute of Astrophysics, Optics, and Electronics (INAOE), and the Ph.D. degree from Texas Tech University, all in electrical engineering. Since 2007 he is at the National Institute of Astrophysics, Optics, and Electronics, Mexico, with a current appointment as titular researcher “C”. He has served at INAOE in administrative positions as Academic Representative, Coordinator of the Electronics Department (2015-2016), and Research Director (2016-2017). He is currently member of the National Research System (SNI), level 2. From 1992 to 2007 he was with Universidad de las Americas-Puebla, Mexico, in several academic and administrative positions: faculty member, Graduate advisor, Chair of the Electrical Engineering Department, Dean of the Engineering School, and University Academic Secretary. From 2002 to 2004 he was president of the National Association of Engineering Schools (ANFEI-MEXICO), and president of the Iberoamerican Association of Academic Engineering Institutions (ASIBEI). In 2006 he received an honorary appointment from Texas Tech University as Academy Member of the Electrical and Computing Engineering Department. He is a senior member of IEEE (Institute of Electrical and Electronic Engineering), past president of IEEE Puebla Section, and founder Chair of the IEEE I&MS Puebla Chapter. In the last years he has been member of the IEEE Instrumentation and Measurement Society Administrative Committee in several positions: past Finance Vice-President, past Treasurer and current Executive Vice-President. His scientific production to date consists of 56 refereed papers in scientific journals, 10 book chapters, and 150 papers in-extenso in proceedings of international conferences. He has been reviewer in several conferences and research journals, and project evaluator as RCEA member for CONACYT, Mexico. His research areas include signal and image processing, pattern recognition, neural networks, computer vision, instrumentation and sensors.

Affiliation(s)

National Institute of Astrophysics, Optics, & Electronics

Mexico

Max Cortner

Boston Scientific Corporation

United States

Max Cortner

Biography

J. Max Cortner earned a BSEE from Iowa State University and an MSEE from the University of Minnesota. After eighteen years as a Test Engineer in defense division of Sperry Corporation, Max moved to the Cardiac Rhythm Management division of Guidant, now the CRM Division of Boston Scientific. Boston Scientific CRM manufactures medical electronics including pacemakers and defibrillators. Max is currently a Senior Fellow Engineer in Test Engineering, a group responsible for automated electronic testing of components, subassemblies and final product in manufacturing. He is a licensed Professional Engineer, a Certified Project Management Professional, and a Senior Member of IEEE. As an active member of the IEEE Twin Cities Section since 1972, Max has held offices in the Computer Society including local chapter chair and area chair. He worked with a group of activists who organized and successfully ran a five-year series of multi-week technical symposia covering hot topics such as computer graphics and artificial intelligence. Max was among the founders of the Twin Cities Chapter of the Instrument and Measurement Society. He helped organize numerous local test conferences and served as General Chair for the IMTC 1998. In 1999, he served on the committee of the IEEE Sections Congress that was held in the Twin Cities. Max was Co-Chair of I2MTC held in Minneapolis in 2013. He now serves on the Instrumentation and Measurement Society Administration Committee in the role of Education Committee Chair, I2MTC Board Chair, and Industrial Relations Subcommittee Chair.

Affiliation(s)

Boston Scientific Corporation

United States

Ruth A. Dyer

Kansas State University

United States

Ruth A. Dyer

Biography

Ruth Dyer earned her doctorate in mechanical engineering from the University of Kentucky, and her bachelor's and master's degrees in biochemistry are from Kansas State University. She joined K-State in 1983 as an assistant professor in the department of electrical and computer engineering and was promoted to full professor in 1997. From 1998 up to her recent retirement, Dr. Dyer served in various administrative roles in the Office of the Provost. In her final, role she served as the senior vice provost for academic affairs.

She has served in a number of leadership roles in the IEEE Instrumentation and Measurement Society (IMS), including Sr. Past President (2020-2021); Awards Chair (2020-2021), Jr. Past President (2018-2019), Nominations & Appointments Chair (2018-2019), President (2016-2017), Vice President for Membership, Vice President for Publications, Vice President for Finance, and Executive Vice President. She is a Fellow of the IEEE, and in 2011 she received the IEEE Instrumentation and Measurement Society's Distinguished Service Award. She served as the General Program Co-Chair for the 2010 I2MTC and as the Technical Program Co-Chair for the 2011 I2MTC. She also served for a number of years as a member of the I2MTC Board of Directors. She served three four-year terms — 1999-2002, 2003-2006, and 2008-2011— as an elected member of the IMS Administrative Committee.

Dr. Dyer also was one of seven individuals from across the United States to be named a Fellow of the Association of Women in Sciences in 2006. She was an American Council on Education (ACE) Fellow in 2003-2004 and served during that time at Ohio State University. In 2013, she was selected for induction into the University of Kentucky (UK) College of Engineering Hall of Distinction, and she currently serves on the UK Engineering Dean’s Advisory Council.

Affiliation(s)

Kansas State University

United States

Marco Parvis

Politecnico di Torino

Italy

Sergio Rapuano

University of Sannio

Italy

Sergio Rapuano

Biography

Sergio Rapuano achieved the MS degree in Electronic Engineering with honors in 1999 and the PhD degree in Computer Science, Applied Electromagnetism and Telecommunications in 2003 from University of Salerno, Italy.

In 2002 he joined the Faculty of Engineering of the University of Sannio, where he currently is Associate Professor of Electric and Electronic Measurement at the Department of Engineering.

He is senior member of the IEEE Instrumentation and Measurement Society and member of the IEEE Standards Association. In particular, within the Instrumentation and Measurement Society he is: Chapter Chair liaison, member of the “Waveform Generation, Measurement and Analysis” Technical Committee (TC-10), chairing the Subcommittee on “Jitter Measurement”; member of the Technical Committee on “Education for Instrumentation and Measurement” (TC-23); vice-chairman of the Subcommittee on Objective Blood Pressure Measurement formed within the Technical Committee on “Medical and Biological Measurements” (TC-25), secretary of the TC-25.

Since 2003 he participated in the organisation of several international scientific meetings in the field of Electronic Measurements: the IEEE International Instrumentation and Measurement Technical Conferences, the International Measurement Confederation (IMEKO) TC-4 Symposia, the IEEE International Workshops on Medical Measurements and Applications, the IMEKO International Workshops on Analog to Digital Converters Modelling and Testing, playing different roles: session chairman, member of the technical program committee, technical co-chairman, general co-chairman.

He published more than 150 papers in international journals and in national and international conference proceedings on the following subjects: ADC and DAC Modelling and Testing, Digital Signal Processing, Distributed Measurement Systems, Medical Measurement and has been guest editor of the following journals: IEEE Transactions on Instrumentation and Measurement, Measurement, Computer Standards and Interfaces and International Journal of Advanced Media and Communications.

He received from the IEEE Instrumentation and Measurement Society the Outstanding Young Engineer Award 2007.

Affiliation(s)

University of Sannio

Italy

George Xiao

National Research Council

Canada

Ruqiang Yan

Xi'an Jiaotong University

China