President

Current

2023 - 2024

Juan Manuel Ramirez Cortés

National Institute of Astrophysics, Optics, & Electronics

Mexico

Email

Juan Manuel Ramirez Cortés

Email

Biography

Juan Manuel Ramirez Cortés was born in Puebla, Mexico. He received the B.Sc. degree from the National Politechnique Institute, Mexico, the M.Sc. degree from the National Institute of Astrophysics, Optics, and Electronics (INAOE), and the Ph.D. degree from Texas Tech University, all in electrical engineering. Since 2007 he is at the National Institute of Astrophysics, Optics, and Electronics, Mexico, with a current appointment as titular researcher “C”. He has served at INAOE in administrative positions as Academic Representative, Coordinator of the Electronics Department (2015-2016), and Research Director (2016-2017). He is currently member of the National Research System (SNI), level 2. From 1992 to 2007 he was with Universidad de las Americas-Puebla, Mexico, in several academic and administrative positions: faculty member, Graduate advisor, Chair of the Electrical Engineering Department, Dean of the Engineering School, and University Academic Secretary. From 2002 to 2004 he was president of the National Association of Engineering Schools (ANFEI-MEXICO), and president of the Iberoamerican Association of Academic Engineering Institutions (ASIBEI). In 2006 he received an honorary appointment from Texas Tech University as Academy Member of the Electrical and Computing Engineering Department. He is a senior member of IEEE (Institute of Electrical and Electronic Engineering), past president of IEEE Puebla Section, and founder Chair of the IEEE I&MS Puebla Chapter. In the last years he has been member of the IEEE Instrumentation and Measurement Society Administrative Committee in several positions: past Finance Vice-President, past Treasurer and current Executive Vice-President. His scientific production to date consists of 56 refereed papers in scientific journals, 10 book chapters, and 150 papers in-extenso in proceedings of international conferences. He has been reviewer in several conferences and research journals, and project evaluator as RCEA member for CONACYT, Mexico. His research areas include signal and image processing, pattern recognition, neural networks, computer vision, instrumentation and sensors.

Affiliation(s)

National Institute of Astrophysics, Optics, & Electronics

Mexico

Past

2020 - 2022

Salvatore Baglio

University of Catania

Italy

Email

Salvatore Baglio

Email

Biography

Salvatore Baglio received the “Laurea” and Ph.D. degrees from the University of Catania, Italy, in 1990 and 1994, respectively.

Since 1996 he is with the Dipartimento di Ingegneria Elettrica Elettronica e Informatica, University of Catania, where he is currently Full Professor of Instrumentation and Measurement.

Prof. Baglio teaches courses in “measurement theory,” “electronic instrumentations,” and “Micro and nanosensors”.

His research interests are mainly focused on micro and nanotechnologies for sensors and transducers, micro and nanosensors, hysteretic materials for sensors, nonlinear dynamics for transducers, methodologies and integrated devices for energy harvesting.

He has coauthored more than 400 scientific publications including papers in international journals and in proceedings of international conferences, books, chapters in books. He is also co-inventor in international patents.

Prof. Baglio is IEEE Fellow, has served as Associate Editor for the IEEE Transaction on Circuits and Systems and for the IEEE Transaction on Instrumentation and Measurements, he has also been Distinguished Lecturer for the IEEE Circuits and Systems Society.

Prof. Baglio is currently Associate Editor in Chief of the IEEE Transaction on Instrumentation and Measurements. He has been the General co-Chair of IEEE I2MTC 2018 and of IEEE SAS 2016 (SAS Steering Committee (2014-2017)).

Salvo Baglio is an I&M Society AdCom member (2015-2018) where he has served as Video Tutorials EIC (2015-2018), Faculty Course Development Award Selection Committee Member (2015-2016), Vice President Education (2016-2017), Society representative on IEEE Sensor Council AdCom (2017-2019, and the I&M Society AdCom Executive Vice President (2018-2019).

He is currently the Society President (2020-2021).

Affiliation(s)

University of Catania

Italy

Past

2018 - 2019

Max Cortner

Boston Scientific Corporation

United States

Email

Max Cortner

Email

Biography

J. Max Cortner earned a BSEE from Iowa State University and an MSEE from the University of Minnesota. After eighteen years as a Test Engineer in defense division of Sperry Corporation, Max moved to the Cardiac Rhythm Management division of Guidant, now the CRM Division of Boston Scientific. Boston Scientific CRM manufactures medical electronics including pacemakers and defibrillators. Max is currently a Senior Fellow Engineer in Test Engineering, a group responsible for automated electronic testing of components, subassemblies and final product in manufacturing. He is a licensed Professional Engineer, a Certified Project Management Professional, and a Senior Member of IEEE. As an active member of the IEEE Twin Cities Section since 1972, Max has held offices in the Computer Society including local chapter chair and area chair. He worked with a group of activists who organized and successfully ran a five-year series of multi-week technical symposia covering hot topics such as computer graphics and artificial intelligence. Max was among the founders of the Twin Cities Chapter of the Instrument and Measurement Society. He helped organize numerous local test conferences and served as General Chair for the IMTC 1998. In 1999, he served on the committee of the IEEE Sections Congress that was held in the Twin Cities. Max was Co-Chair of I2MTC held in Minneapolis in 2013. He now serves on the Instrumentation and Measurement Society Administration Committee in the role of Education Committee Chair, I2MTC Board Chair, and Industrial Relations Subcommittee Chair.

Affiliation(s)

Boston Scientific Corporation

United States

Past

2016 - 2017

Ruth A. Dyer

Kansas State University

United States

Email

Ruth A. Dyer

Email

Biography

Ruth Dyer earned her doctorate in mechanical engineering from the University of Kentucky, and her bachelor's and master's degrees in biochemistry are from Kansas State University. She joined K-State in 1983 as an assistant professor in the department of electrical and computer engineering and was promoted to full professor in 1997. From 1998 up to her recent retirement, Dr. Dyer served in various administrative roles in the Office of the Provost. In her final, role she served as the senior vice provost for academic affairs.

She has served in a number of leadership roles in the IEEE Instrumentation and Measurement Society (IMS), including Sr. Past President (2020-2021); Awards Chair (2020-2021), Jr. Past President (2018-2019), Nominations & Appointments Chair (2018-2019), President (2016-2017), Vice President for Membership, Vice President for Publications, Vice President for Finance, and Executive Vice President. She is a Fellow of the IEEE, and in 2011 she received the IEEE Instrumentation and Measurement Society's Distinguished Service Award. She served as the General Program Co-Chair for the 2010 I2MTC and as the Technical Program Co-Chair for the 2011 I2MTC. She also served for a number of years as a member of the I2MTC Board of Directors. She served three four-year terms — 1999-2002, 2003-2006, and 2008-2011— as an elected member of the IMS Administrative Committee.

Dr. Dyer also was one of seven individuals from across the United States to be named a Fellow of the Association of Women in Sciences in 2006. She was an American Council on Education (ACE) Fellow in 2003-2004 and served during that time at Ohio State University. In 2013, she was selected for induction into the University of Kentucky (UK) College of Engineering Hall of Distinction, and she currently serves on the UK Engineering Dean’s Advisory Council.

Affiliation(s)

Kansas State University

United States

Past

2014 - 2015

Reza Zoughi

Iowa State University

United States

Email

Reza Zoughi

Email

Biography

R. Zoughi received his B.S.E.E, M.S.E.E, and Ph.D. degrees in electrical engineering (radar remote sensing, radar systems, and microwaves) from the University of Kansas where from 1981 until 1987 he was at the Radar Systems and Remote Sensing Laboratory (RSL). He is the Kirby Gray (Battelle) Chair in Engineering and a Professor Electrical and Computer Engineering (ECpE) at Iowa State University (ISU). He is also the Director of Center for Nondestructive Evaluation (CNDE) at ISU. He served as the Schlumberger Endowed Professor of Electrical and Computer Engineering at Missouri University of Science and Technology (Missouri S&T) from January 2001 to August 2019. Prior to joining Missouri S&T and since 1987 he was with the Electrical and Computer Engineering Department at Colorado State University (CSU). He is the recipient of the 2007 IEEE Instrumentation and Measurement Society Distinguished Service Award, the 2009 American Society for Nondestructive Testing (ASNT) Research Award for Sustained Excellence, the 2011 IEEE Joseph F. Keithley Award in Instrumentation and Measurement and the 2020 IEEE Instrumentation and Measurement Society Career Excellence Award. In 2013 and 2020 he and his co-authors received the H. A. Wheeler Applications Prize Paper Award from the IEEE Antennas and Propagation Society (APS). He is also the recipient of the 2023 American Society for Nondestructive Testing (ASNT) Lester/Mehl Honor Lecture Award. He has twenty issued US patents to his credit (in addition to several issued abroad). He has served the IEEE Instrumentation and Measurement Society and the IEEE in various capacities.

Affiliation(s)

Iowa State University

United States

Past

2012 - 2013

Jorge F. Daher

Ciea Ingenieria Electrica

Uruguay

Email

Past

2010 - 2011

Kim Fowler

Kansas State University

United States

Email

Past

2008 - 2009

Alessandro Ferrero

Politecnico di Milano

Italy

Email

Alessandro Ferrero

Email

Biography

Alessandro Ferrero (M’88–SM’96–F’99) was born in Milan, Italy, in 1954. He received the M.Sc. degree in electrical engineering from Politecnico di Milano in 1978. In 1983, he joined the Dipartimento di Elettrotecnica, Politecnico di Milano, as an Assistant Professor of electrical measurements. From 1987 to 1991, he was with the University of Catania, Italy, as an Associate Professor of measurements on electrical machines and systems. From 1991 to 1994, he was with the Dipartimento di Elettrotecnica, Politecnico di Milano, as an Associate Professor of electrical measurements, where he has been a Full Professor since 1994.

His current research interests include uncertainty evaluation, the application of digital methods to electrical measurements and measurements on electric power systems under nonsinusoidal conditions.

Prof. Ferrero has chaired the Italian Association for Electrical and Electronic Measurements for the three-year term 2004–2007 and he has been the President of the IEEE Instrumentation and Measurements Society for the 2008 – 2009 term. He is the recipient of the 2006 Joseph F. Keithley IEEE Field Award for Instrumentation and Measurement.
As an AE for the IEEE Transactions on Instrumentation and Measurement he covers the areas of Digital Signal Processing and Measurement on Power Systems. IEEE I&M Society President 2008-2009; TIM Associate Editor|| Fellows Evaluation Chair (2017)|| Associate Editor-in-Chief, TIM (2017)|| I&M AdCom (2017)|| Editor-in-Chief of the Transactions on Instrumentation and Measurement (2012-2016)|| I&M Magazine Editorial Board (2014, 2015, 2016)|| VP Publications (2007)

Affiliation(s)

Politecnico di Milano

Italy

Designated Editor for OJIM Conflict-of-Interest Papers

Past

2006 - 2007

Stephen A. Dyer

Kansas State University

United States

Email

Stephen A. Dyer

Email

Biography

Stephen A. Dyer holds the B.S. in physics, the M.S. in electrical engineering, and the Ph.D. in engineering, all from Kansas State University, Manhattan. He has spent most of his career in academics, receiving his first faculty appointment at the age of 23, and has held faculty positions in physics, mathematics, and electrical and computer engineering. In addition, he has taught courses in entrepreneurship, as well as segments of courses in physical chemistry, flight dynamics, anatomy and physiology, and creative problem-solving. Having had appointments at five different institutions, Steve currently serves at Kansas State, where he was promoted to full professor in 1989.

His research has spanned a number of areas, notably instrumentation and measurement, spectrometry, digital signal processing, and communication theory. His contributions to stationary-mask Hadamard-transform multiplex spectrometry—in particular, the design and development of spectrum-recovery methods and fast algorithms to improve performance at low signal-to-noise ratios—were cited in his elevation, in 1997, to IEEE Fellow. In all, Dyer has more than 125 technical publications, including his edited book, Survey of Instrumentation and Measurement (Wiley, 2001).

Dr. Dyer has had connection, as well, with industry and the public. Before he started in academics, he worked in engineering positions, writing software and designing semi-automatic test equipment. For the past 30 years, he has acted as a consultant for about 40 companies and institutions, doing analysis, product-design, or forensic work in various areas, including instrument design, signal processing, electromagnetics, and optics.

Steve has also helped make students aware of IEEE through his on-campus service, having served as IEEE Student Branch Counselor at the University of Kentucky and at K-State. He was also the co-founding faculty advisor for the IEEE EMBS Chapter at K-State.
Dyer has been active in the I&M Society since the 1980s, and has been on the AdCom continuously since the beginning of 1992, serving the Society in various capacities, including Past President in 2006-2007 and 2000-2001.

Affiliation(s)

Kansas State University

United States

Past

2004 - 2005

Robert C. Rassa

Raytheon

United States

Email

Past

2002 - 2003

Brian Wadell

Guided Wave Solutions

United States

Email

Past

2000 - 2001

Stephen A. Dyer

Kansas State University

United States

Email

Stephen A. Dyer

Email

Biography

Stephen A. Dyer holds the B.S. in physics, the M.S. in electrical engineering, and the Ph.D. in engineering, all from Kansas State University, Manhattan. He has spent most of his career in academics, receiving his first faculty appointment at the age of 23, and has held faculty positions in physics, mathematics, and electrical and computer engineering. In addition, he has taught courses in entrepreneurship, as well as segments of courses in physical chemistry, flight dynamics, anatomy and physiology, and creative problem-solving. Having had appointments at five different institutions, Steve currently serves at Kansas State, where he was promoted to full professor in 1989.

His research has spanned a number of areas, notably instrumentation and measurement, spectrometry, digital signal processing, and communication theory. His contributions to stationary-mask Hadamard-transform multiplex spectrometry—in particular, the design and development of spectrum-recovery methods and fast algorithms to improve performance at low signal-to-noise ratios—were cited in his elevation, in 1997, to IEEE Fellow. In all, Dyer has more than 125 technical publications, including his edited book, Survey of Instrumentation and Measurement (Wiley, 2001).

Dr. Dyer has had connection, as well, with industry and the public. Before he started in academics, he worked in engineering positions, writing software and designing semi-automatic test equipment. For the past 30 years, he has acted as a consultant for about 40 companies and institutions, doing analysis, product-design, or forensic work in various areas, including instrument design, signal processing, electromagnetics, and optics.

Steve has also helped make students aware of IEEE through his on-campus service, having served as IEEE Student Branch Counselor at the University of Kentucky and at K-State. He was also the co-founding faculty advisor for the IEEE EMBS Chapter at K-State.
Dyer has been active in the I&M Society since the 1980s, and has been on the AdCom continuously since the beginning of 1992, serving the Society in various capacities, including Past President in 2006-2007 and 2000-2001.

Affiliation(s)

Kansas State University

United States

Incumbent(s)