Transactions on I&M Editorial Board | IEEE Instrumentation & Measurement Society

TIM Editor-in-Chief

Shervin Shirmohammadi

University of Ottawa

Canada

Shervin Shirmohammadi

Biography

Shervin Shirmohammadi received his Ph.D. in Electrical Engineering from the University of Ottawa, Canada, where he is currently a Professor with the School of Electrical Engineering and Computer Science. He is Director of the Distributed and Collaborative Virtual Environment Research Laboratory, doing research in multimedia systems and networks, including measurement techniques for networking, video streaming, and health systems. The results of his research, funded by more than $14 million from public and private sectors, have led to over 350 publications, 3 Best Paper awards, over 70 researchers trained at the postdoctoral, PhD, and Master’s levels, over 20 patents and technology transfers to the private sector, and a number of awards. He is the Editor-in-Chief of IEEE Transactions on Instrumentation and Measurement, an Associate Editor of IEEE Transactions on Circuits and Systems for Video Technology, and an Associate Editor of ACM Transactions on Multimedia Computing, Communications, and Applications, having been numerously recognized as the Associate Editor of the Year for all 3 journals. He was also the Associate Editor-in-Chief of IEEE Transactions on Instrumentation and Measurement in 2013 and 2016, and Associate Editor-in-Chief of IEEE Instrumentation and Measurement magazine in 2014 and 2015.

He has been an IMS AdCom member since 2014, and served as the Vice President of its Membership Development Committee from 2014 to 2017, as well as a member of the IEEE I²MTC Board of Directors from 2014 to 2016.

Dr. Shirmohammadi is an IEEE Fellow for contributions to multimedia systems and network measurements, recipient of the 2019 George S. Glinski Award for Excellence in Research, a Senior Member of the ACM, a University of Ottawa Gold Medalist, and a licensed Professional Engineer in Ontario.

Affiliation(s)

University of Ottawa

Canada

Senior Area Editor: Medical, Biomedical, and Healthcare Instrumentation and Measurement

Kurt Barbé

Vrije Universiteit Brussel

Belgium

Kurt Barbé

Biography

Kurt Barbé (S’05-M’09-SM’16) received the Master degree in Mathematics and the PhD degree in engineering from the Vrije Universiteit Brussel (VUB), Brussels, Belgium, in 2005 and 2009 respectively. Presently, he is a professor at the VUB at the faculty of Medicine. He is furthermore a co-founder of the research group Digital Mathematics (DIMA) holding a strong expertise in applied mathematics for engineering sciences and beyond. At VUB, he is the founder of the interfaculty centre for data-processing and statistics providing statistical and methodological support to the university community at large. Dr. Barbé is a former research fellow of the Flemish Research Foundation (FWO) and VUB-coordinator of FLAMES – the Flemish inter-university training network on research methodology and statistics. His current research interest is in the field of numerical methods and computational statistics applied to biomedicine.

Dr. Barbé has served as an Associate Editor since 2010 and Associate Editor in Chief in 2018-2019 for the IEEE Transactions on Instrumentation and Measurement. Since 2017 he has served as secretary of the royal Belgian statistical society. Finally, since 2019 he has joined the editorial board for the journal Fractal and Fractional as well as Sensors. He was a recipient of the Outstanding Young Engineer Award from the IEEE Instrumentation and Measurement Society in 2011 and the Andi Chi Best Paper Award of the IEEE Transactions on Instrumentation and Measurement in 2013. Two PhD students received the IEEE Instrumentation and Measurement Graduate Fellowship award under his supervision in 2012 and 2017.

Affiliation(s)

Vrije Universiteit Brussel

Belgium

Senior Area Editor: Power Instrumentation and Measurement

Dario Petri

University of Trento

Italy

Dario Petri

Biography

Dario Petri received the M.Sc. degree (summa cum laude) and the Ph.D. degree in Electronics Engineering from the University of Padova, Italy, in 1986 and 1990, respectively. From 1990 to 1992 he was an assistant professor at the Department of “Electronics and Information Engineering” of the same University. In 1992 he joined the University of Perugia, Italy, as an associate professor. Then he has been elevated to full professorship of Measurement and Electronic Instrumentationin 1999. In 2002 he joined the Department of “Information Engineering and Computer Science” at the University of Trento, Italy, where he was the chair of the International Ph.D. School in “Information and Communication Technology” from 2004 to 2007 and the chair of Information Engineering study programs from 2007 to 2010. At present he is the head of the Department.

He has chaired the Italy Chapter of the IEEE I&M Society from 2006 to 2010. Currently he is the Vice Chair of the IEEE Italy Section. Also, he has been a Co-founder and General Chair of the Ph.D Schol “International Measurement University” (IMU) of the IEEE I&M Society from 2008.

Dr. Petri is an author of over two hundred papers published in international journals or in proceedings of peer reviewed international conferences.

Dario Petri is an Associate Editor of the IEEE Transactions on I&M and a Fellow member of the IEEE.

Areas of expertise Dario Petri as an Associate Editor are: Analog-digital conversion, Acquisition systems, Computer architecture and information, Design for testability, Digital signal processors, Digital signal processing, Digital-analog conversion, Embedded systems, Error analysis, FPGA, Measurement precision, Measurement theory, Measurement and estimation uncertainty, Sigma delta converters, Sigma delta modulators, Signal processing, Telecommunication measurements, Testing equipment, Time and frequency signal analysis.

TIM Associate Editor-in-Chief|| I&M AdCom (2015-2018, 2011-2014); VP Finance (2014-2018); Finance Committee Chair (2014-2018); Fellows Coordination Committee Chair (2016-2018)|| Graduate Fellowship Award Chair (2015-2016)

Affiliation(s)

University of Trento

Italy

Senior Area Editor: Automation, Fault Diagnosis, Maintenance, and Testing

Ruqiang Yan

Xi'an Jiaotong University

China

TIM Associate Editor-in-Chief

Vedran Bilas

University of Zagreb

Croatia

Amitava Chatterjee

Jadavpur University

India

Amitava Chatterjee

Biography

Amitava Chatterjee received the Bachelor of Electrical Engineering, Master of Electrical Engineering., and Ph.D. (Engineering) degrees from Jadavpur University, Kolkata, India, in 1991, 1994 and 2002, respectively. He joined the faculty of the Department of Electrical Engineering, Jadavpur University in 1997 where he is currently serving as a Professor. He is a recipient of the Japanese Government (Monbukagakusho) Scholarship in 2003 and a recipient of the Japan Society for the Promotion of Science (JSPS) Post-Doctoral Fellowship in 2004. In 2004 and in 2009 he visited University of Paris XII, Val de Marne, France and in 2017 he visited Université Paris-Est, France as an Invited Teacher. Dr. Chatterjee's key research interests include intelligent instrumentation, systems and control, signal processing, image processing and robotics.

Dr. Chatterjee has authored/coauthored more than 140 papers published in international journals or in proceedings of peer reviewed international conferences. He has co-authored two books and co-edited two books. He presently serves as an Associate Editor of IEEE Transactions on Instrumentation and Measurement and IEEE Sensors Journal and Editor of IEEE Transactions on Vehicular Technology and Engineering Applications of Artificial Intelligence Journal (Elsevier).

Dr. Chatterjee is a Fellow of Indian National Academy of Engineering, a Fellow of the IETE (India), a Fellow of the Institution of Engineers (India), and a Senior Member of the IEEE (USA).

Affiliation(s)

Jadavpur University

India

Roberto Ferrero

University of Liverpool

United Kingdom

Daniele Fontanelli

University of Trento

Italy

George Xiao

National Research Council

Canada

TIM Associate Editor

Mohamed Abou-Khousa

Khalifa University of Science & Technology

United Arab Emirates

Yasutaka Amagai

National Metrology Institute of Japan

Japan

Shoaib Amin

Ericsson

Sweden

Bruno Andò

University of Catania

Italy

Bruno Andò

Biography

Bruno Andò is currently Associate Professor in Measurement Science at the Department of Electric, Electronic and Information Engineering (DIEEI) of the University of Catania, Italy.

He received the M.S. in Electronic Engineering and the Ph.D. in Electrical Engineering from the University of Catania, Italy, in 1994 and 1999 respectively. From 1999 he performs research in the fields of sensor and instrumentation at the DIEEI of the University of Catania.

RESEARCH ACTIVITY

Bruno Andò leads a group of researchers working in the following fields:

Smart Sensing Systems and Readout Electronics;
Assistive Technologies;
Nano and Micro Sensors, µ-fluidics, Bio-Sensors;
Inkjet Printed Sensors and Flexible Sensors;
Sensors exploiting innovative materials (ferrofluids, ferroelectrics and multiferroics);
Sensor Networks;
Smart signal processing and nonlinear techniques (including stochastic resonance and dithering) to improve performances of sensors and bio-receptors.

ACHIEVEMENTS IN SCIENTIFIC SOCIETIES

Since 1997 he is member of IEEE, and since 2013 he is a Senior Member of IEEE.
He is the Chair Elected of the IEEE SAS Advisory Board, 2017-2019.
He belongs to the following Technical Committee of the IEEE Instrumentation and Measurement Society: TC-18 “Environmental Measurements”, TC-37 “Measurement and Networking” and TC-13 “Wireless & Telecommunications in Measurements”.
He is a member of the IEEE Instrumentation and Measurements Faculty Course Development Award Committee for years 2016, 2017.
Since 2010 he is a member of the AitAAL (Italian Association on Ambient Assisted Living) and since 2004 he is a member of the Italian Group of Electric and Electronic Measurement “GMEE”, Italy.
Since 2015 he is the Chairman of the National Research Activity on “Sensors and Transducers for Measurement” of the Italian Measurement Group (GMEE).
He is delegated of the “Sicily (Italy) District on Micro&Nano Systems”, to the Italian Cluster on “Technology for Life Environments (TAV)”, as an expert in the field of "Technology for Assisted Living".
He belongs to the List of supporters of AALOA (AAL OPEN ASSOCIATION-www.aaloa.org/).
In 2011, 2013 he was with the Technical Program Committee of “EvAAL (Evaluating AAL Systems through Competitive Benchmarking)” competition organized by AALOpenAssociation on “Indoor Localization”, Valencia.
IEEE Transactions on Instrumentation and Measurement 2017 Outstanding Reviewer

ACTIVITY IN JOURNAL EDITORIAL BOARDS

He is Associate Editor of the IEEE Instrumentation and Measurement Society - Video Tutorial.
He is Associate Editor in Chief of the IEEE Magazine on Instrumentation and Measurement.
He belongs to the editorial board of the Journal of Sensor Technology (Scientific Research Publishing, SCIRP).
He belongs to the editorial board of the Journal of Sensors (Hindawi).

He acted as a columnist of the IEEE Magazine on Instrumentation and Measurement.

CONFERENCES, PROJECTS, PUBLICATIONS

He has an active role as Organizer, TPC, Publicity Chair and Session Chair, for several National and International Conferences, the latest: IEEE I2MTC (2013,2014, 2015, 2016, 2018), IEEE M&N 2013, 2015, 2017), IEEE SAS (2016, 2017, 2018).
He is the scientific coordinator of several international and national research projects.
He has co-authored more than 8 patents and 200 scientific peer-review papers.
Detailed information are available: http://www.dees.unict.it/users/bando/index.html

EXPERT AND REVIEWER TASKS

He acts as an external expert and reviewer for the following institutions:

Research Executive Agency: H2020-MSCA-IF, H2020-MSCA-ITN, H2020-MSCA-RISE.
the National Centre of Science and Technology, Ministry of Education and Science, Republic of Kazakhstan, Astana.
National Centre for Research and Development, Poland.
Czech-Norwegian Research Programme CZ09.
Italian Research Ministry (MIUR), National Research Programs.
Italian MIUR, evaluation panel for the assessment of research quality in Italy (VQR).

TEACHING ACTIVITY

Since 1999, he has taught several classes in measurement and sensors science.
Since 2011 he teaches the English class, ”Sensors and advanced measurement systems” of the degree in Automation Engineering and Control of Complex Systems: http://masterinautomation.ing.unict.it/
Since 2013 he teaches the English class, “Electronic Measurements” of the degree in Electronic Engineering.
Bruno Andò has tutored several Master Degree and PhD thesis.

Affiliation(s)

University of Catania

Italy

David Ayllon

UBTECH Robotics

United States

Christoph Baer

Ruhr-Universität Bochum

Germany

Sasan Bakhtiari

Argonne National Laboratory

United States

Daniel Belega

Politehnica University of Timișoara

Romania

Anoop C. S.

Indian Institute of Space Science and Technology

India

Eduardo Cabal-Yepez

University of Guanajuato

Mexico

Gaigai Cai

Xidian University

China

Bruno Albuquerque de Castro

São Paulo State University

Brazil

Yuhua Cheng

University of Electronic Science & Technology of China

China

Lorenzo Ciani

University of Florence

Italy

Lorenzo Ciani

Biography

Lorenzo Ciani (S’08–M’10-SM'16) received the M.S. degree in electronic engineering and the Ph.D. degree in Industrial and Reliability Engineering from the University of Florence, Italy, in 2005 and 2009, respectively. He is currently a Post-Doctoral Research Fellow with the Department of Information Engineering, University of Florence. From June, 2012 he is a TÜV Rheinland Industrie Service GmbH – Functional Safety Engineer – ID 5062/12. He is a Teaching assistant for “Reliability and Quality control” and “Diagnostic and systems’ safety” course

Lorenzo Ciani is active also in the field of technical publications. It has been a Guest Editor for Elsevier “Measurement” and Section Editor for “ACTA Imeko” journal. He is currently reviewer for IEEE “Transactions on Instrumentation & Measurement”, Elsevier “Measurement”, Elsevier “Computer Standard & Interface” and Elsevier “Microelectronics Reliability” journal

He is technical program committee member of the IEEE International Instrumentation and Measurement Technology Conference ESREF European Symposium on Reliability of Electron Devices, Failure Physics and Analysis IMEKO TC10 Workshop. He has been selected as I&M Society President Appointee for IEEE IMS Graduate Fellowship Award Committee 2017-2018

His current research interests include system reliability, availability, maintainability and safety, reliability evaluation test and analysis for electronic systems and devices, fault detection and diagnosis, and electrical and electronic instrumentation and measurement.

Affiliation(s)

University of Florence

Italy

Valentina Cosentino

University of Palermo

Italy

Valentina Cosentino

Biography

Valentina Cosentino received the M.S. and Ph.D. degrees in electrical engineering from University of Palermo, Palermo, Italy, in 2001 and 2005, respectively. Currently she is Professor of Electrical and Electronic Measurements at University of Palermo, Department of Engineering.

Her main research activity is in the field of development of measurement methods and instrumentation for diagnosis, management and control of smart grids and power systems. The research themes include: harmonic sources detection in power systems; power, energy and power quality measurements in nonsinusoidal conditions; characterization of measurement equipment and current transducers in the presence of harmonics; arc fault detection; power line communications and measurement methods, devices and architectures for low and medium voltage smart grids applications.

She has co-authored more than 150 scientific publications, in journals, conferences proceedings, research reports for industries. She is also co-inventor of one US patent.

She has been member of the Non-Sinusoidal Situations Working Group of IEEE Power & Energy Society for the revision of the standard IEEE Std 1459-2010, “IEEE Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions”.

She is member of the IEEE–IMS Instrumentation and Measurement Society, IEEE–PES Power and Energy Society and Italian Associations AEI (Association of Electrical and Electronic Engineers) and GMEE (Association of Electrical and Electronic Measurements).

She has served as TPC member and/or reviewer for various IEEE conferences, including IEEE International Instrumentation and Measurement Technology Conference, IEEE International Workshop on Applied Measurements.

She is reviewer for several ISI journals, including IEEE Transactions on Instrumentation and Measurement, IEEE Sensors Journal, IEEE Transactions on Industrial Electronics, Measurement (Elsevier).

She serves as Associate Editor for IEEE Transactions on Power Delivery (from Sept. 2018) and IEEE Transactions on Instrumentation and Measurement (from June 2019).

Affiliation(s)

University of Palermo

Italy

Loredana Cristaldi

Politecnico di Milano

Italy

Alessio De Angelis

University of Perugia

Italy

Branislav Djokic

National Research Council

Canada

Kristen Donnell

Missouri University of Science & Technology

United States

Kristen Donnell

Biography

Kristen M. Donnell (S’07-M’11-SM’12) received her B.S.E.E. degree in May 2001 from Colorado State University, her M.S.E.E degree in December 2003 from the University of Missouri-Rolla, and her Ph.D. degree in Electrical Engineering at Missouri University of Science and Technology (Missouri S&T) in December 2010. Her Ph.D. research was conducted at the Applied Microwave Nondestructive Testing Laboratory (amntl). She is currently an Assistant Professor in the Department of Electrical and Computer Engineering at Missouri S&T, and a member of the research team at the amntl. Her current research interests include modulated antennas/scatterers, materials characterization, frequency selective surfaces, microwave and millimeter wave imaging, and hybrid nondestructive testing methods. Prior to starting her Ph.D. work, Kristen was employed by Raytheon Company, Tewksbury, MA, from 2003 to 2006 as a Systems Engineer and Electrical Engineer.

Dr. Donnell is a Senior Member of IEEE, and is also involved with the IEEE Instrumentation and Measurement (I&M) Society, where she served as an appointed member of the AdCom from 2007-2011 and is currently serving her second term as an at-large AdCom member. She served as the Chapter Chair Liaison from 2010-2012, the Vice President of the Membership Development Committee in 2013-2014, and has been the Distinguished Lecturer Program Chair since 2012. She has also been involved with the Faculty Course Development and Graduate Fellowship Awards. She also developed the annual Chapter Chair Summit that takes place each year at the I&M Society’s flagship conference, the International Instrumentation and Measurement Technology Conference, and recently developed the Chapter Support Program and serves as the Chapter Advisor to the Puebla Section Chapter.

She is the recipient of the IEEE Instrumentation and Measurement Society 2012 Outstanding Young Engineer Award, the Missouri University of Science and Technology Outstanding Teaching Award for the 2011-2012 academic year, and the 2014 Faculty Excellence in Teaching award. During her graduate studies, she was the recipient of the ASNT Fellowship Award for the 2002-2003 and 2006-2007 academic years, the Missouri S&T Chancellors Fellowship for 2006-2009, and the Missouri S&T University Transportation Center Graduate Fellowship for 2006.

Affiliation(s)

Missouri University of Science & Technology

United States

Güvenir Kaan Esen

Turkish Standards Institute

Turkey

Güvenir Kaan Esen

Biography

Güvenir Kaan ESEN was born in Sakarya, Turkey in 1984. He received his BSc degree in Electrical Engineering in 2008 and the MSc degree in Energy Science and Technology in 2014 respectively from Istanbul Technical University Istanbul, Turkey. He received PhD in Energy Systems Engineering Department Program at Kocaeli University in 2018, Kocaeli, Turkey. Following the completion of his undergraduate education, he worked as an energy center manager and project engineer at the company of Adapazarı Goodyear Tires from 2008 to 2009. Between 2009 and 2010, he worked as a project engineer at the National Estate General Directorate in Turkey. From August 2010, he has worked for Turkish Standards Institute (TSE) as specialist, test staff, laboratory management system manager and project coordinator respectively. At August 22, 2017, he was appointed as Director for Electrotechnical Laboratory Gebze Directorate. During the working time in TSE, he has worked on several projects as project manager for TSE. He directed the Turkey's first accredited Electric Motor Testing Laboratory (0.12 to 90 kW) Installation Project. He also took role in UNDP Promoting Energy-Efficient Motors in Small and Medium-Sized Enterprises (SMEs) project in Turkey. He worked for R&D processes of TSE Electric Motors Test Laboratory Capacity Extending (90-375 kW) Project and worked as project manager for TSE leg. He is a chief Assessor and Trainer at the Turkish Standards Institute on the Energy management system EN ISO 50001, Laboratory Management System EN ISO IEC 17025 and Measurement Uncertainty and Method Validation topics. He is a member of the IEC Technical Mirror Committees; MTC108 Energy Management System, ISO/PJ-242 Power Management, MTC122 Rotary Machines (IEC / TC 2-CLC / TC 2) at TSE. He is an IEC Conformity Assessment for Electrotechnical Equipment and Components (IECEE) Technical Expert Assessor and Turkish Accreditation Agency (TURKAK) Technical Expert Assessor. His current field of research and interests include measurement uncertainty and method validation, laboratory management system, energy management system, energy efficiency and electric motors. He also interested in PMI project management methodology.

Affiliation(s)

Turkish Standards Institute

Turkey

Lisa-Marie Faller

Carinthia University of Applied Sciences

Austria

Alessandro Ferrero

Politecnico di Milano

Italy

Alessandro Ferrero

Biography

Alessandro Ferrero (M’88–SM’96–F’99) was born in Milan, Italy, in 1954. He received the M.Sc. degree in electrical engineering from Politecnico di Milano in 1978. In 1983, he joined the Dipartimento di Elettrotecnica, Politecnico di Milano, as an Assistant Professor of electrical measurements. From 1987 to 1991, he was with the University of Catania, Italy, as an Associate Professor of measurements on electrical machines and systems. From 1991 to 1994, he was with the Dipartimento di Elettrotecnica, Politecnico di Milano, as an Associate Professor of electrical measurements, where he has been a Full Professor since 1994.

His current research interests include uncertainty evaluation, the application of digital methods to electrical measurements and measurements on electric power systems under nonsinusoidal conditions.

Prof. Ferrero has chaired the Italian Association for Electrical and Electronic Measurements for the three-year term 2004–2007 and he has been the President of the IEEE Instrumentation and Measurements Society for the 2008 – 2009 term. He is the recipient of the 2006 Joseph F. Keithley IEEE Field Award for Instrumentation and Measurement.
As an AE for the IEEE Transactions on Instrumentation and Measurement he covers the areas of Digital Signal Processing and Measurement on Power Systems. IEEE I&M Society President 2008-2009; TIM Associate Editor|| Fellows Evaluation Chair (2017)|| Associate Editor-in-Chief, TIM (2017)|| I&M AdCom (2017)|| Editor-in-Chief of the Transactions on Instrumentation and Measurement (2012-2016)|| I&M Magazine Editorial Board (2014, 2015, 2016)|| VP Publications (2007)

Affiliation(s)

Politecnico di Milano

Italy

Edoardo Fiorucci

University of L'Aquila

Italy

Edoardo Fiorucci

Biography

Edoardo Fiorucci received the "laurea" degree cum laude in Electrical Engineering and the Ph.D. degree in Electrical and Information Engineering from the University of L’Aquila (Italy), in 2000 and 2004 respectively. His dissertation thesis focused on the New Techniques and Digital Instrumentation for the Power Quality Evaluation.

Since 2006 he is a Researcher in Measurements and Instrumentation in the Department of Industrial and Information Engineering and Economics and an Aggregate Professor of Testing of Electrical Machines and Power Systems in the Faculty of Engineering at the University of L'Aquila.

Edoardo Fiorucci is the author of more than 100 scientific publications, in international and Italian journals, transactions, books and conferences concerning the following research areas: 1) pc-based instrumentation; 2) measurement systems for power quality evaluation; 3) measurement systems for automatic testing of electrical machines; 4) smart web sensors for distributed measurement applications; 5) medical instrumentation.

Since 2003 he is a Member of IEEE IMS Instrumentation and Measurement Society.

He serves as a reviewer for: IEEE IMS Transactions on Instrumentation and Measurement, IEEE IES Transactions on Industrial Electronics, IEEE PES Transactions on Energy Conversion, IMEKO Measurement Journal, IOP Metrologia, and IOP Measurement Science and Technology.

In 2006, he won the "Carlo Offelli" Award of the Italian Association GMEE for his PhD thesis.

He received three times the recognition as one of IMS Transactions "Outstanding Reviewers", for the years 2008, 2009 and 2011.

In 2011 he has been elevated to IEEE Senior Member grade.

Since January 2012 Edoardo Fiorucci serves as an "Associate Editor" for the IEEE IMS Transactions on Instrumentation and Measurement.

Affiliation(s)

University of L'Aquila

Italy

Mohamad Forouzanfar

SRI International

United States

Ada Fort

University of Siena

Italy

Guglielmo Frigo

Swiss Federal Institute of Metrology

Switzerland

Yuan Gao

Missouri University of Science & Technology

United States

Javad R. Gatabi

SeekOps Inc.

United States

Dimitrios Georgakopoulos

National Measurement Institute

Australia

Boby George

IIT Madras

India

Sabrina Grassini

Politecnico di Torino

Italy

Fabricio Guimaraes Baptista

Universidade Estadual Paulista Júlio

Spain

Rajarshi Gupta

University of Calcutta

India

Kamel Haddadi

University of Lille 1

France

Hamed Hamzehbahmani

Durham University

United Kingdom

Hamed Hamzehbahmani

Biography

Hamed Hamzehbahmani (SM’ 18) is an Assistant Professor in Electrical Engineering in the Department of Engineering at Durham University. He received the BEng in electrical engineering in 2005 from Birjand University in Iran, MSc in electrical engineering in 2007 from IUST in Iran, and PhD degree in electrical engineering from Cardiff University, UK in 2014. Following his PhD he was appointed as a research associate at Cardiff University in the field of grounding systems for HVAC and HVDC networks in corporation with National Grid. He was later appointed as a lecturer in electrical engineering at Ulster University in the UK. He had also worked as a consultant engineer in HV substations and distribution networks, with engineering consultant companies. He has authored more than 30 papers in peer reviewed journals and conferences, and a written textbook on “Electric Circuit Theory”. His research interest is focussed on experimental study and analytical modelling of magnetic properties of electrical steel and magnetic materials under complex magnetising conditions, inter-laminar fault analysis and condition monitoring of magnetic cores, and new magnetic materials for future energy systems (renewable energy systems and variable speed drives). Additionally, he is regularly referee papers for different journals and conferences in the field of magnetics, electrical machines and electrical engineering.

Dr Hamzehbahmani is a senior member of IEEE, a member of the editorial board of IEEE Transactions on Instrumentation and Measurement as an Associate Editor and an active member of UK magnetic society. He is also a member of North East Centre for Energy Materials (NECEM) and a member of the Commonwealth Scholarship Commission in the UK (CSC).

Affiliation(s)

Durham University

United Kingdom

Moinul Hossain

University of Kent

United Kingdom

Jingyu Hua

Zhejiang Gongshang University

China

Chi Hung Hwang

Taiwan Instrument Research Institute, NARLabs

Taiwan

Tarikul Islam

Jamia Millia Islamia (University)

India

Tae-Weon Kang

Korea Research Institute of Standards & Science

South Korea

Martti Kirkko-Jaakkola

Finnish Geospatial Research Institute

Finland

Yuya Koyama

Chiba Institute of Technology

Japan

Jan Kučera

Czech Technical University in Prague

Czechia

V. Jagadeesh Kumar

Indian Institute of Technology, Madras

India

Jochen Lang

University of Ottawa

Canada

John Lataire

Vrije Universiteit Brussel

Belgium

Massimo Lazzaroni

Università degli Studi di Milano

Italy

Huang-Chen Lee

National Chung-Cheng University

Taiwan

Jing Lei

North China Electric Power University

China

Shisong Li

Bureau International des Poids et Mesures

France

Shutao Li

Hunan University

China

Sheng-Fu Liang

National Cheng Kung University

Taiwan

Sheng-Fu Liang

Biography

Sheng-Fu Liang is a Professor in Department of Computer Science and Information Engineering, and Institute of Medical Informatics, National Cheng Kung University (NCKU), Taiwan. He received his B.S. and M.S. degrees in Control Engineering from National Chiao Tung University (NCTU), Taiwan, in 1994 and 1996, respectively, and the Ph.D. degree in Electrical and Control Engineering from NCTU, in 2000. From 2001 to 2005, he was a Research Assistant Professor in Electrical and Control Engineering and in Brain Research Center, NCTU. He joined the Department of Biological Science and Technology of NCTU in 2005 and joined the Department of Computer Science and Information Engineering and Institute of Medical Informatics of NCKU in 2006. He is also a principal investigator of AI Biomedical Research Center at NCKU, funded by Ministry of Science and Technology (MOST), Taiwan. Dr. Liang co-authored the best paper at Journal of Information Science and Engineering (JISE) in 2005 and the distinguished technical paper at 2013 IEEE International Solid-State Circuits Conference (ISSCC). He also received the highly cited patent award from Industrial Technology Research Institute, Taiwan, in 2009. He has authored and co-authored more than 50 journal papers and owns 12 patents. Three of his invented technologies have been successfully transferred to various industrial companies. Dr. Liang presently serves as an Associate Editor of IEEE Transactions on Instrumentation and Measurement, and a Technical Program Committee (TPC) Member for the IEEE/CAS-EMB Biomedical Circuits and Systems Conference (BioCAS). His research interests includes biomedical instrumentation and measurement, neural engineering, biomedical signal processing, medical informatics, and computational intelligence.

Affiliation(s)

National Cheng Kung University

Taiwan

Kok-Sing Lim

University of Malaya

Malaysia

Datong Liu

Harbin Institute of Technology

China

Huan Liu

China University of Geosciences

China

Peter X. Liu

Carleton University

Canada

Weiwen Liu

Shanghai Jiao Tong University

China

Zheng Liu

The University of British Columbia

Canada

Zhigang Liu

Southwest Jiaotong University

China

Yixin Ma

Shanghai Jiao Tong University

China

Qiang Miao

Sichuan University

China

Priya Ranjan Muduli

Indian Institute of Technology (BHU)

India

Anirban Mukherjee

Indian Institute of Technology Kharagpur

India

Subhas Mukhopadhyay

Macquarie University

Australia

Subhas Mukhopadhyay

Biography

Dr. Subhas Chandra Mukhopadhyay (M’97, SM’02, F’11) graduated from the Department of Electrical Engineering, Jadavpur University, Calcutta, India with a Gold medal and received the Master of Electrical Engineering degree from Indian Institute of Science, Bangalore, India. He has PhD (Eng.) degree from Jadavpur University, India and Doctor of Engineering degree from Kanazawa University, Japan.

Currently, he is working as a Professor of Mechanical/Electronics Engineering with the Department of Engineering, Macquarie University, New South Wales, Australia. He is the Programme Leader of the Mechatronics Engineering Degree Programme. He has over 26 years of teaching and research experiences.

His fields of interest include Smart Sensors and Sensing Technology, Wireless Sensor Networks, Instrumentation and Measurements, Internet of Things, Environmental Measurements, Electromagnetics, Control Engineering, Mechatronics, Magnetic Bearing, Fault Current Limiter, Electrical Machines and numerical field calculation etc.

He has authored/co-authored over 400 papers in different international journals, conferences and book chapter. He has edited fifteen conference proceedings. He has also edited seventeen special issues of international journals as lead guest editor and thirty books with Springer-Verlag.

He was awarded numerous awards throughout his career and attracted over US$3.0 M on different research projects.

He has delivered 296 seminars including keynote, tutorial, invited and special seminars.

He is a Fellow of IEEE (USA), a Fellow of IET (UK) and a Fellow of IETE (India). He is a Topical Editor of IEEE Sensors Journal, and an Associate Editor IEEE Transactions on Instrumentation and Measurements. He is in the editorial board of e-Journal on Non-Destructive Testing, Sensors and Transducers, Transactions on Systems, Signals and Devices (TSSD). He is the co-Editor-in-chief of the International Journal on Smart Sensing and Intelligent Systems. He was the Technical Programme Chair of ICARA 2004, ICARA 2006 and ICARA 2009. He was the General chair/co-chair of ICST 2005, ICST 2007, IEEE ROSE 2007, IEEE EPSA 2008, ICST 2008, IEEE Sensors 2008, ICST 2010, IEEE Sensors 2010, ICST 2011, ICST 2012, ICST 2013, ICST 2014, ICST 2015 and ICST 2016. He organized the IEEE Sensors conference 2009 at Christchurch, New Zealand during October 25 to 28, 2009 as General Chair, and the 11th ICST in Sydney, Australia during December 4-6, 2017. He is former Chair of the IEEE Instrumentation and Measurement Society New Zealand Chapter. TC-18 Chair; TIM Associate Editor

Affiliation(s)

Macquarie University

Australia

Carlo Muscas

University of Cagliari

Italy

Arunava Naha

Uppsala University

Sweden

Paolo Attilio Pegoraro

University of Cagliari

Italy

Lihui Peng

Tsinghua University

China

Zhengyu Peng

Aptiv

Ireland

Adam Polak

Wroclaw University of Science & Technology

Poland

Ferdinanda Ponci

RWTH Aachen University

Germany

Octavian Adrian Postolache

Instituto Universitário de Lisboa

Portugal

Octavian Adrian Postolache

Biography

Prof. Dr. Octavian Adrian Postolache (M’99, SM’2006) graduated in Electrical Engineering at the Gh. Asachi Technical University of Iasi, Romania, in 1992 and he received the PhD degree in 1999 from the same university, and university habilitation in 2016 from Instituto Superior Tecnico, Universidade de Lisboa, Portugal. In the period 1992-2000 he served as assistant professor at Technical University of Iasi. In 2000 he became principal researcher of Instituto de Telecomunicações where he is now Senior Researcher. He served as invited professor at EST/IPS Setubal, Portugal between 2001 and 2012 when he joined Instituto Universitario de Lisboa/ ISCTE-IUL Lisbon where he is currently A. Professor. His fields of interests are smart sensors for biomedical and environmental applications, pervasive sensing and computing, wireless sensor networks, signal processing with application in biomedical and telecommunications, non-destructive testing and diagnosis based on eddy currents smart sensors, computational intelligence with application in automated measurement systems. He was principal researcher of different projects including EHR-Physio regarding the implementation of Electronic Health Records for Physiotherapy and he is currently principal researcher of TailorPhy project Smart Sensors and Tailored Environments for Physiotheraphy.He served as technical principal researcher in projects such Crack Project related non-destructive testing of conductive materials. He is vice-director of Instituto de Telecomunicações/ISCTE-IUL delegation, director of PhD program Science and Communication Technologies at ISCTE-IUL, and he was leader of several collaboration projects between the Instituto de Telecomunicaçoes and the industry such as Home TeleCare project with Portuguese Telecommunication Agency for Innovation (PT Inovação), Integrated Spectrum Monitoring project with National Communication Agency (ANACOM). He is active member of national and international research teams involved in Portuguese and EU and International projects. Dr. Postolache is author and co-author of 10 patents, 10 books, 18 book chapters, 320 papers in international journals proceedings of international conference with peer review,. He is IEEE Senior Member I&M Society, Distinguished Lecturer of IEEE IMS with more than DLP actions, chair of IEEE I&MSTC-13 Wireless and Telecommunications in Measurements, member of IEEE I&M TC-17, IEEE I&M TC-18, IEEE I&MS TC-25, IEEE EMBS Portugal Chapter and chair of IEEE IMS Portugal Chapter. He is Associate Editor of IEEE Sensors Journal, and IEEE Transaction on Instrumentation and Measurements (2016-2017) guest editor of several special issues of Sensors MDPI. He was general chair of IEEE MeMeA 2014, and TPC chair of ICST 2014, Liverpool, ICST 2015 Aukland and ICST2017 Sydney. He received IEEE best reviewer and the best associate editor in 2011 and 2013 and other awards related to his research activity in the field of smart sensing for healthcare. Distinguished Lecturer (May, 2017 thru 12/31/2020); TC-13 Co-Chair; IMS Portugal Chapter Chair|| TIM Associate Editor (2016-2017)|| Distinguished Lecturer (May, 2014 thru 12/31/2017)

Affiliation(s)

Instituto Universitário de Lisboa

Portugal

Ferran Reverter

Universitat Politècnica de Catalunya

Spain

Seyed Hossein Hesamedin Sadeghi

Amirkabir University of Technology

Iran

V.R. Singh

National Physical Laboratory

India

V.R. Singh

Biography

Prof. V.R.Singh, Ph.D. (IIT-Delhi), 1974: Fellow-IEEE/EMBS-IMS, F-IETE, F-IE-I, F-ASI/USI, F-IFDUMB has 35 yrs of research-cum-teaching experience in India and other foreign countries; has been working at National Physical Lab, New Delhi, as a Scientist/Director/Distinguished Researcher/Head- Instrumentation, Sensors and Biomedical Measurements and Standards; has over 250 papers, 150 talks, 4 books, 14 patents, 30 consultancies and 22 PhDs. He is Associate Editor of IEEE Trans on Instrum and Measurements and is on Editorial Boards of Sensors and Transducers J (Europe) and Int J Onlinne Engg (Austria); as well as on the Editorial Review Committees of various other journals like Sensors and Actuators (Switzerland), IEEE Trans, J Computers in Elect Engg (USA), J.Instn Electr Telecom Engrs, J.Instn Engrs -India, Ind J Pure and Appl Physics, J.of Instrm Soc Ind, J. Pure and Appl Ultrasonics, J. Life Science Engg, etc He is the recipient of awards by INSA 1974, NPL 1973, Thapar Trust 1983, ICMR 1984; Japan Soc. Ultr in Medicine 1985, Asian Fed Soc Ultr in Med and Biology 1987, IE-I 1988/ 1991 and IEEE-EMBS 1999. He is the Chairman of IEEE-Delhi and Chair of IEEE-EMBS/IMS-Delhi chapters and Vice President of Ultrasonic Society of India. Presently, Dr Singh is a Distinguished Professor at NPL, New Delhi, India, as well as has been a visiting Professor at Korea University, South Korea. His main areas of interest are sensors and transducers, biomedical instrumentation and nano-electronics, cancer research. TIM Associate Editor; Chapter Chair

Affiliation(s)

National Physical Laboratory

India

Roman Sotner

Brno University of Technology

Czechia

Roman Sotner

Biography

Roman Sotner received the M.Sc. and Ph.D. degrees from the Brno University of Technology, Czech Republic, in 2008 and 2012, respectively. Currently, he is an Associate Professor at the Department of Radio Electronics, Faculty of Electrical Engineering and Communication, Brno University of Technology, Brno, Czech Republic.

His research interests include modern analogue adjustable active elements, electronic control/adjustment of circuits (active filters, oscillators, generators, etc.), circuits synthesis (integer and fractional-order) and design (including also microelectronic IC design and layout), computer simulations and modeling, behavioral modeling and representation, real circuit behavior, parasitic analysis and characterization and experimental work. He has authored and co-authored more than 160 scientific publications in journals and conferences proceedings.

He is member of IEEE, IEEE Circuits and Systems Society and IEICE. He has served as TPC member and/or reviewer of many conferences (Midwest Symposium on Circuits and Systems, Electronics, International Symposium on Circuits and Systems, International Conference on Electronics Circuits and Systems, etc.). He works as reviewer for many international journals (International Journal of Electronics, International Journal of Circuit Theory and Applications, Microelectronics Journal, Analog Integrated Circuits and Signal Processing, Circuits Systems and Signal Processing, IEEE Access, IEEE Transactions on Circuits and Systems I, II, IEEE Transactions on Industrial Electronics, IET Circuits Devices and Systems, IET Electronics Letters, AEU - International Journal of Electronics and Communications, etc.) He serves as associated editor of Radioengineering Journal (from 2014).

Affiliation(s)

Brno University of Technology

Czechia

Chao Tan

Tianjin University

China

Samir Trabelsi

United States Department of Agriculture

United States

Samir Trabelsi

Biography

Samir Trabelsi received his Licence de Physique and Maîtrise de Physique from l'Université Paul Sabatier, Toulouse, France, in 1985 and 1987, respectively, and his Diplôme d'Etudes Approfondies and Ph. D. in Electronics from the Institut National Polytechnique de Toulouse in 1988 and 1993, respectively. Dr. Trabelsi is a Research Electronics Engineer and Lead scientist of the Dielectrics Group, Quality and Safety Assessment Research Unit, ARS, USDA, in Athens, Georgia, and holds an adjunct Associate Research Scientist position with the Department of Biological and Agricultural Engineering, The University of Georgia. His research involves development of methods and sensors for rapid and nondestructive determination of bulk density and moisture content in granular and particulate materials and measurement and modeling of dielectric properties of water-containing materials at RF and microwave frequencies. His expertise is in dielectric measurements, microwave and millimeter nondestructive testing, moisture content measurements and high-frequency measurements. He has published more than 195 technical papers and reports on these subjects and holds three patents. Dr. Trabelsi is an Associate Editor of the IEEE Transactions on Instrumentation and Measurement, and for several years has served on the Technical Program Committee of the IEEE I2MTC and IEEE-APS International Conferences. He is a senior member of the Institute of Electrical and Electronics Engineers (IEEE) and a member and a chartered physicist of the Institute of Physics (IOP). He is a member of Sigma Xi, the Scientific Research Society, and a member of the American Society of Agricultural and Biological Engineers.

Affiliation(s)

United States Department of Agriculture

United States

Xiaotong Tu

Xiamen University

China

Jesus Urena

University of Alcalá

Spain

Jesus Urena

Biography

Jesús Ureña (M’06) was born in Alcalá la Real, Jaén, Spain, in 1964. He received the B.S. degree in Electronics Engineering and the M.S. degree in Telecommunications Engineering from the Polytechnic University of Madrid, Madrid, Spain, in 1986 and 1992, respectively; and the Ph.D. degree in Telecommunications from the University of Alcalá, Madrid, Spain, in 1998.

Since 1986, he has been with the Department of Electronics, University of Alcalá, currently as a Full Professor. During the period 1993-1997 he was the Head of the Department. He has directed or collaborated in more than 40 educational and research projects in the area of electronic control and sensorial systems for mobile robots and assisted wheelchairs and in the area of electronic distributed systems for railways.

Dr. Ureña has co-authored more than 130 papers in International Journals and Conferences.

Dr. Ureña is member of IEEE (Instrumentation and Measurement Society Membership). He has been or is in the TPC of several IEEE International Conferences as WISP, I2MTC, ETFA, VECIMS, ICARA, ... He served as the General Co-chair of WISP2007 and as the Special Session Chair in WISP2009.

As an Associate Editor of the Transactions on Instrumentation and Measurements his areas of expertise are centered in: Acoustics instrumentation and measurements, Electronic Circuits and Equipments, Digital Communications and Telecommunication Measurements, Automation, Controls and Control Systems, Signal Processing, Vision Systems, Ultrasonics.

Affiliation(s)

University of Alcalá

Spain

Helko E. van den Brom

VSL Dutch Metrology Insitute

Netherlands

Helko E. van den Brom

Biography

Helko E. van den Brom (M’14–SM’15) was born in Utrecht, the Netherlands, in 1971. He received the M.Sc. degree in theoretical solid-state physics from Utrecht University in 1995, and the Ph.D. degree in experimental solid-state physics from Leiden University, the Netherlands, in 2000.

In 2000, he joined the Dutch national metrology institute VSL in Delft, the Netherlands, where he started working on the development of Josephson and SET based electrical quantum standards. At present, as a principle scientist his current research interests are in power quality, conducted EMI, high-current transducers, sampling systems, and AC Josephson voltage standards.

Dr. Van den Brom is a senior member of the Institute of Electrical and Electronics Engineers (IEEE), member of the IEEE Instrumentation & Measurement Society and the IEEE Power & Energy Society, member of the Dutch Physical Society (NNV), technical assessor for the Dutch Accreditation Council (RvA), delegate of the Netherlands for the Consultative Committee for Electricity and Magnetism (CCEM) of the International Committee for Weights and Measures (CIPM), and contact person for VSL in the technical committee of electricity and magnetism (TCEM) and the TCEM subcommittee of DC and quantum electrical measurements of the European Association of National Metrology Institutes (EURAMET). He was a recipient of the best Ph.D. paper award of the Dutch Journal of Physics (NTvN) in 2000.

Affiliation(s)

VSL Dutch Metrology Insitute

Netherlands

Chao Wang

Tianjin University

China

Dong Wang

Shanghai Jiao Tong University

China

Hongrui Wang

Delft University of Technology

Netherlands

Shibin Wang

Xi'an Jiaotong University

China

Wilson Wang

Lakehead University

Canada

He Wen

Hunan University

China

Lin Xu

ShanghaiTech University

China

Yong Yan

University of Kent

United Kingdom

Wuqiang Yang

The University of Manchester

United Kingdom

Wuqiang Yang

Biography

Wuqiang Yang is a Fellow of the IET (formerly IEE), Fellow of the InstMC and Fellow of the IEEE. He received his BEng, MSc and PhD degrees from Tsinghua University in Beijing. Since 1991, he has been with The University of Manchester (formerly UMIST) in the UK and now is a professor in the School of Electrical and Electronic Engineering. His main research interests include industrial tomography, especially electrical capacitance tomography, image reconstruction algorithms, sensing and data acquisition systems, electronic circuit design, instrumentation and multiphase measurement. He has published over 300 papers, is a referee for over 40 journals (including 6 IEEE journals), editorial board member of 6 journals, guest editor of several journal special issues and visiting professor at 6 other universities. He received 1997 IEE/NPL Wheatstone Measurement Prize, 1997 Honeywell Prize from the InstMC, 2000 IEE Ayrton Premium, 2006 Global Research Award from the Royal Academy of Engineering, 2008 Outstanding Organization award from the IEEE I&M Society, 2009 Valued Reviewer from Sensors and Actuators journal, 2009 IET Innovation Award Finalist, and 2010 Outstanding Reviewer from Sensor Review journal. He is an honorary chairman of IEEE Int. Conference on Imaging Systems and Techniques 2009-2012. His biography has been included in Who’s Who in the World, Who’s Who in Science and Engineering and Who’s Who in America since 2002. TIM Associate Editor, Distinguished Lecturer (2013-2016)

Affiliation(s)

The University of Manchester

United Kingdom

Jianbo Yu

Tongji University

China

Emanuele Zappa

Politecnico di Milano

Italy

Lei Zhang

Chongqing University

China

Lei Zhang

Biography

Dr. Lei Zhang received his Ph.D degree in Circuits and Systems from the College of Communication Engineering, Chongqing University, Chongqing, China, in June 2013. From June to September 2013, he is a research visitor in Tsinghua University (Shenzhen) and Harbin Institute of Technology (Shenzhen). He was selected as a Hong Kong Scholar in China in 2013, and worked as a Post-Doctoral Fellow with The Hong Kong Polytechnic University, Hong Kong, from 2013 to 2015. He is a senior visiting professor in University of Macau from 2017 to 2018. He is currently a Professor/Distinguished Research Fellow at the School of Microelectronics and Communication Engineering, Chongqing University, China. He is the deputy director of the Chongqing Key Laboratory of Bio-perception and Intelligent Information Processing, the leader of LiVE Group (Learning Intelligence and Visual Essential). He is an IEEE Senior Member.

His research interests include computer vision, machine learning, pattern recognition, signal processing and intelligent systems. He has authored more than 100 scientific papers in many top journals such as IEEE Transactions (TIP, TNNLS, TIM, TCSVT, TCYB, TSMCA, etc.) and top conferences (ICCV, ACM MM, AAAI, IJCNN, ACCV, etc.). He served as an Associate Editor for Neural Networks and for IEEE Transactions on Instrumentation and Measurement. He also served as a senior program committee for ECAI and a program committee for CVPR, ICCV, AAAI, ICLR, IJCAI, etc.

Affiliation(s)

Chongqing University

China

Yan Zhuang

Dalian University of Technology

China

Zhenbing Zhao

North China Electric Power University

China

Reza Zoughi

Iowa State University

United States

Reza Zoughi

Biography

R. Zoughi received his B.S.E.E, M.S.E.E, and Ph.D. degrees in electrical engineering (radar remote sensing, radar systems, and microwaves) from the University of Kansas where from 1981 until 1987 he was at the Radar Systems and Remote Sensing Laboratory (RSL). He is the Kirby Gray (Battelle) Chair in Engineering and a Professor Electrical and Computer Engineering (ECpE) at Iowa State University (ISU). He served as the Schlumberger Endowed Professor of Electrical and Computer Engineering at Missouri University of Science and Technology (Missouri S&T) from January 2001 to August 2019. Prior to joining Missouri S&T and since 1987 he was with the Electrical and Computer Engineering Department at Colorado State University (CSU), where he was a professor and established the Applied Microwave Nondestructive Testing Laboratory (amntl) (http://amntl.mst.edu/). Dr. Zoughi held the position of Business Challenge Endowed Professor of Electrical and Computer Engineering from 1995 to 1997 while at CSU.

While at CSU he received nine teaching awards, including the State Board of Agriculture, Excellence in Undergraduate Teaching Award and the Abell Faculty Teaching Award. Since at Missouri S&T he has received seventeen Outstanding Teaching Awards & Commendations. He is the recipient of the 2007 IEEE Instrumentation and Measurement Society Distinguished Service Award, the 2009 American Society for Nondestructive Testing (ASNT) Research Award for Sustained Excellence and the 2011 IEEE Joseph F. Keithley Award in Instrumentation and Measurement. In 2013 he and his co-authors received the H. A. Wheeler Applications Prize Paper Award from the IEEE Antennas and Propagation Society (APS).

He is the author of a textbook entitled “Microwave Nondestructive Testing and Evaluation Principles” KLUWER Academic Publishers, 2000, and the co-author of a chapter on Microwave Techniques in the book entitled “Nondestructive Evaluation: Theory, Techniques, and Applications” Marcel and Dekker, Inc., 2002. He is the co-author of 170 refereed journal papers, 350⁺conference proceedings and presentations and 118 technical reports.

He served as the Editor-in-Chief of the IEEE Transactions on Instrumentation and Measurement (2007-2011), two terms as an at-large AdCom member of the IEEE Instrumentation and Measurement (I&M) Society, I&M Society President (2014-2015) and serves as an I&M Society Distinguished Lecturer. He served as the General Co-Chair of the 2013 IEEE Instrumentation and Measurement Technology Conference (I²MTC). He has been elected as an at-large member of IEEE Publications Services & Products Board (PSPB) for two terms (2016-2018 & 2019-2021), and served on the IEEE TAB/PSPB (2015 & 2017-2019).

He has eighteen issued US patents to his credit (with several issued abroad) in the field of microwave nondestructive testing and evaluation. He has delivered numerous Invited and Keynote presentations on the subject of microwave and millimeter wave nondestructive testing and imaging. He is a Fellow of the Institute of Electrical and Electronics Engineers (IEEE) and a Fellow of the American Society for Nondestructive Testing (ASNT).

I&M AdCom (2020-2023)|| TIM Associate Editor; I2MTC Board of Directors Chair (2016-2019)|| Society Awards Chair (2018-2019)|| Sr. Past President (2018-2019)|| Jr. Past President (2016-2017)|| N&A Committee Chair (2016-2017)|| Distinguished Lecturer (2018-2021)|| Distinguished Lecturer (2014-2017)